Call 131 546 and get a quote or book a New Home Inspection for online today.
Jim’s Building Inspections conducts new home inspections (also known as new construction inspections) in and the surrounding areas. Our expert consultants can assist you with every stage of your build and ensure your new build meets your expectations and the necessary standards.
Our local consultants have extensive experience and hold public liability and professional indemnity insurance—meaning you can have peace of mind when you acquire the services of a Jim’s Building Inspector.
We offer same day service for New Home Inspections in and provide written reports via email within 24 hours of the inspection being conducted.
New Home Inspection Checklist
There are four key inspection stages which can be carried out for New Home Inspections:
1. Slab Stage
The slab stage or the base stage inspection is essential in the inspection process. Finished concrete is inspected to ensure there is an even and consistent finish. The surface should not be powdery or flakey. Levels are checked to confirm the slab has been installed within allowable deviation in the over level across and room or the entire build. The edge rebate is checked to ensure it is not “honeycombed” and there is no evidence of steel reinforcement protruding as it must have at least 40mm concrete coverage. The vapour barrier must extend past the poured concrete slab with adequate overlap left so that it extends up the side wall of the slab past the final finished ground level once the construction is completed.
2. Frame Stage
Frame stage inspections are conducted providing an independent assessment of the works to confirm they have been completed ready for stage payment. Internal checks and company appointed inspections are supported with a fresh and focussed and our review monitors the frame with respect to the approved construction methods stipulated in Australian Standard 1684.2 and the Engineers design requirements as detailed on the Approved Plans.
The installation of windows and door frames are checked at this stage. Frame positioning in relation to the supporting slab is checked with any overhanging tolerances along with load bearing timbers, lintels and orientation of Jack Studs above openings. Items such as the correct number of timber blocks and their securing method are checked along with all bracing, mechanical fasteners, tie downs and anchors.
3. Lockup
At this stage we inspect the roofing that is installed to ensure it is complete and free of defects and damage, all flashings are installed. A visual inspection is carried out to check the installation of Flashings. Brick work is checked for correct installation. All windows and doors are installed with the correct fixings using appropriate blocks and the frame straight, plumb and true.
The installed plaster to the ceilings, wall linings and fitted cornice is checked to ensure it is installed to acceptable standards. Waterproof membrane to showers & wet areas are inspected to ensure they are correctly installed and comply with the requirements of the Building Code.
4. Handover
Handover Inspections require an exhaustive check of the construction. At handover inspection we check that all the work completed “In a proper and workman like manner” ensuring that the workmanship is at an industry standard. The construction of the dwelling needs to reflect the Approved Plans and we check that all components of the building comply with relevant Australian Standards and Building Codes.
Handover or Final stage inspections are also called Practical Completion Inspections (PCI) and Pre Handover Inspections. Handover inspections are generally carried out on new homes when construction of the entire home has been completed and all internal fittings, fixtures and finishes have been installed and applied inside the home compliant with the relevant building plans and specifications.
To arrange a quote or a building inspection for a property in , call Jim’s Building Inspections on 131 546.
Or book your New Home Inspection service online. Reports can be delivered within 24 hours of inspection.
Fact - Termites Hate Good Building Inspectors
A good building inspector knows how to find termite issues. A bad building inspector, by way of contrast, is a termite’s best friend. When Joe Blow (not his real name) bought a two-bedroom 1920s terrace in Sydney’s inner west for around $1 mil...Read more
Things to consider when building your first home
You might decide that rather than buying an established property as your first home, it would better suit you to build. Building your first home can be both an exciting and overwhelming experience. Building allows you to customise your home from t...Read more
Do you think that property you are looking to buy has asbestos?
If the house you are looking to buy was built or renovated before 1990, it is likely that it will contain some form of asbestos-containing materials. Did you know that approximately one-third of homes built in Australia contain asbestos products? ...Read more
Depreciation - A Most Valuable Deduction
Looking to claim? For property owners, depreciation is the gift that keeps on giving and another reason to talk with the professionals at Jim’s Building Inspections. To wit, investors deduct the amount of income-producing assets in decline over the...Read more
Buying Off-The-Plan Housing Needn't Be Scary
Buying an off-the-plan house needn’t be scary if you make smart choices. One important choice: Seeking out experts in New Construction – and Jim’s Building Inspections is a good place to start. Buying off-the-plan with professional guidan...Read more
Building Inspectors Break Secrets
Building inspectors break secrets. It’s their job to do so and we wouldn’t have it any other way. They’re in one very real sense property detectives. It’s fraudulent for a vendor to knowingly conceal defects according to the law. This incl...Read more
Common defects found in homes
Are you buying a home or investment property? Here are some of the common defects that our building inspectors in homes. Termite damage The advantages of getting a vendor report before putting your house on the market. Termite damage was found ...Read more
10 Horrifying Traps a (Good) House Inspector Might Find
Number One: Asbestos. Enough said. Number Two: Termites. In a word: EVIL. Number Three: Fire hazards. Wouldn’t wish this upon my worst enemy. Number Four: Faulty smoke alarms. It’s a thing. Number Five: Ghosts. Okay, kidding. Okay, ma...Read more
How Jim's Building Inspections Became Australia's Number One Choice
Jim’s Building Inspections has grown to become Australia’s largest building inspection business in just three years. How did we do that? It was actually pretty easy, which is probably a damning commentary on the state of the industry! The ...Read more
How do I go back to my home after Fire Damage?
A fire is a traumatic experience, and it can cause more damage than what you can see initially. Beyond the physical fire damage, you must also consider the smoke and soot contamination. Both can be dangerous and costly. Fire damage can extend to t...Read more