Call 131 546 and get a quote or book a New Home Inspection for Nalang online today.
Jim’s Building Inspections conducts new home inspections (also known as new construction inspections) in Nalang and the surrounding areas. Our expert consultants can assist you with every stage of your build and ensure your new build meets your expectations and the necessary standards.
Our local consultants have extensive experience and hold public liability and professional indemnity insurance—meaning you can have peace of mind when you acquire the services of a Jim’s Building Inspector.
We offer same day service for New Home Inspections in Nalang and provide written reports via email within 24 hours of the inspection being conducted.
New Home Inspection Checklist
There are four key inspection stages which can be carried out for New Home Inspections:
1. Slab Stage
The slab stage or the base stage inspection is essential in the inspection process. Finished concrete is inspected to ensure there is an even and consistent finish. The surface should not be powdery or flakey. Levels are checked to confirm the slab has been installed within allowable deviation in the over level across and room or the entire build. The edge rebate is checked to ensure it is not “honeycombed” and there is no evidence of steel reinforcement protruding as it must have at least 40mm concrete coverage. The vapour barrier must extend past the poured concrete slab with adequate overlap left so that it extends up the side wall of the slab past the final finished ground level once the construction is completed.
2. Frame Stage
Frame stage inspections are conducted providing an independent assessment of the works to confirm they have been completed ready for stage payment. Internal checks and company appointed inspections are supported with a fresh and focussed and our review monitors the frame with respect to the approved construction methods stipulated in Australian Standard 1684.2 and the Engineers design requirements as detailed on the Approved Plans.
The installation of windows and door frames are checked at this stage. Frame positioning in relation to the supporting slab is checked with any overhanging tolerances along with load bearing timbers, lintels and orientation of Jack Studs above openings. Items such as the correct number of timber blocks and their securing method are checked along with all bracing, mechanical fasteners, tie downs and anchors.
3. Lockup
At this stage we inspect the roofing that is installed to ensure it is complete and free of defects and damage, all flashings are installed. A visual inspection is carried out to check the installation of Flashings. Brick work is checked for correct installation. All windows and doors are installed with the correct fixings using appropriate blocks and the frame straight, plumb and true.
The installed plaster to the ceilings, wall linings and fitted cornice is checked to ensure it is installed to acceptable standards. Waterproof membrane to showers & wet areas are inspected to ensure they are correctly installed and comply with the requirements of the Building Code.
4. Handover
Handover Inspections require an exhaustive check of the construction. At handover inspection we check that all the work completed “In a proper and workman like manner” ensuring that the workmanship is at an industry standard. The construction of the dwelling needs to reflect the Approved Plans and we check that all components of the building comply with relevant Australian Standards and Building Codes.
Handover or Final stage inspections are also called Practical Completion Inspections (PCI) and Pre Handover Inspections. Handover inspections are generally carried out on new homes when construction of the entire home has been completed and all internal fittings, fixtures and finishes have been installed and applied inside the home compliant with the relevant building plans and specifications.
To arrange a quote or a building inspection for a property in Nalang, call Jim’s Building Inspections on 131 546.
Or book your Nalang New Home Inspection service online. Reports can be delivered within 24 hours of inspection.
Safety Reversal Check For Automatic Garage Door
In most houses, the largest moving object is a garage door. Newer garage doors are often operated remotely through radio controls, electrical systems, pulleys and motors. Serious injury or death from being hit by a closing garage door or from bein...Read more
Building? Here Are Mark Campbell's Lessons Learned
“My rationale for building new was threefold,” writes Mark Campbell, a working-class Aussie. “Firstly, it enabled me to have control over the end product and it made sense from an investment perspective because I could maximise depreciation and...Read more
What Does Jim Know About Building Inspections Anyway?
ACTUALLY, QUITE A BIT MORE THAN WE EVER REALISED! We recently discovered that Jim Penman’s dad was a forensic engineer. From an early age Jim’s father was investigating materials, structures and their components which failed o...Read more
Re-stumping red flags
A guide to Re-Stumping Re-stumping - or re-blocking as it's known in Victoria - is big business in Australia and can be a very costly exercise, particularly if you don't know what you're looking at and you don't understand what you've bought into....Read more
What is a Building Inspection?
A building inspection is designed to give you independent and objective advice about the physical state of a building, enabling you to make an informed decision, generally about whether or not to buy a building. A building inspection is a snapshot...Read more
Tax Depreciation Schedules
Did you know Jim’s Building Inspections have now started providing Tax Depreciation Schedules for Property Investors around the country? Why? Our Inspectors are in thousands of homes and apartments everyday conducting Pre-Purchase Building Ins...Read more
The D-Word: Time To Talk Depreciation
Sad fact: Many Australian rental property owners are failing to correctly calculate depreciation. “I have often seen clients who have owned investment properties for five, six or seven years and have never claimed any form of depreciation becaus...Read more
No Shortcuts For Property Inspections
There are no shortcuts for property inspections in the professional world. In fact, the backing of an experienced inspector from Jim’s Building Inspections can save you much grief. A professional is on top of his or her game and working for you....Read more
What's Depreciation?
New to the property investment game and struggling with the lingo? You’re not alone. Below is one definition posted by news.com.au to build your real-estate knowledge. What’s depreciation? > Depreciation Often investors can claim a po...Read more
The Science Of Inspections
There’s a science to property inspections. Seriously. Because while your average inspector can and does spot problems, a trained inspector can find problems behind problems and other easy-to-miss issues. What’s more, he or she is less likely t...Read more