Call 131546 and get a quote or book a New Home Inspection for Bellevue online today.
Jim’s Building Inspections conducts new home inspections (also known as new construction inspections) in Bellevue and the surrounding areas. Our expert consultants can assist you with every stage of your build and ensure your new build meets your expectations and the necessary standards.
Our local consultants have extensive experience and hold public liability and professional indemnity insurance—meaning you can have peace of mind when you acquire the services of a Jim’s Building Inspector.
We offer same day service for New Home Inspections in Bellevue and provide written reports via email within 24 hours of the inspection being conducted.
New Home Inspection Checklist
There are four key inspection stages which can be carried out for New Home Inspections:
Slab Stage
The slab stage or the base stage inspection is essential in the inspection process. Finished concrete is inspected to ensure there is an even and consistent finish. The surface should not be powdery or flakey. Levels are checked to confirm the slab has been installed within allowable deviation in the over level across and room or the entire build. The edge rebate is checked to ensure it is not “honeycombed” and there is no evidence of steel reinforcement protruding as it must have at least 40mm concrete coverage. The vapour barrier must extend past the poured concrete slab with adequate overlap left so that it extends up the side wall of the slab past the final finished ground level once the construction is completed.
Frame Stage
Frame stage inspections are conducted providing an independent assessment of the works to confirm they have been completed ready for stage payment. Internal checks and company appointed inspections are supported with a fresh and focussed and our review monitors the frame with respect to the approved construction methods stipulated in Australian Standard 1684.2 and the Engineers design requirements as detailed on the Approved Plans.
The installation of windows and door frames are checked at this stage. Frame positioning in relation to the supporting slab is checked with any overhanging tolerances along with load bearing timbers, lintels and orientation of Jack Studs above openings. Items such as the correct number of timber blocks and their securing method are checked along with all bracing, mechanical fasteners, tie downs and anchors.
Lockup
At this stage we inspect the roofing that is installed to ensure it is complete and free of defects and damage, all flashings are installed. A visual inspection is carried out to check the installation of Flashings. Brick work is checked for correct installation. All windows and doors are installed with the correct fixings using appropriate blocks and the frame straight, plumb and true.
The installed plaster to the ceilings, wall linings and fitted cornice is checked to ensure it is installed to acceptable standards. Waterproof membrane to showers & wet areas are inspected to ensure they are correctly installed and comply with the requirements of the Building Code.
Handover
Handover Inspections require an exhaustive check of the construction. At handover inspection we check that all the work completed “In a proper and workman like manner” ensuring that the workmanship is at an industry standard. The construction of the dwelling needs to reflect the Approved Plans and we check that all components of the building comply with relevant Australian Standards and Building Codes.
Handover or Final stage inspections are also called Practical Completion Inspections (PCI) and Pre Handover Inspections. Handover inspections are generally carried out on new homes when construction of the entire home has been completed and all internal fittings, fixtures and finishes have been installed and applied inside the home compliant with the relevant building plans and specifications.
To arrange a quote or a building inspection for a property in Bellevue, call Jim’s Building Inspections on 131546.
Or book your Bellevue New Home Inspection service online. Reports can be delivered within 24 hours of inspection.
Go With Licensed Pre-Property Inspectors
What makes a good pre-property inspector? Sourceable’s Howard Ryan writes: ‘To do the job properly, a qualified building inspector will have extensive knowledge of the Building Code of Australia, the Building Act, the Building Regulations and var...Read more
What's involved in a home inspection?
Most of the time we never get to meet our clients face to face and only a small handful are ever able to come along to the home inspections we organise. So there is often a bit of mystery around what exactly we do during a home inspection. ...Read more
A Good Building Inspection Is Better Than An Expensive Cure
Put yourself in Hao’s shoes. He buys his dream home only to discover a buyer’s worst nightmare: most of his buildings are illegal. As the Whittlesea Council says: His bungalow was constructed without a permit. And to add insult to financial in...Read more
The D-Word: Time To Talk Depreciation
Sad fact: Many Australian rental property owners are failing to correctly calculate depreciation. “I have often seen clients who have owned investment properties for five, six or seven years and have never claimed any form of depreciation becaus...Read more
Need To Know - Building Inspection Inclusions and Exclusions
It is important to understand what is generally included and excluded in a building inspection service. Jim's Building Inspections work hard to understand what type of property you are purchasing. Factors that influence which building inspection...Read more
Asbestos Dumpers Beware
There’s a right way and a wrong way to do a job and this is especially true for asbestos. As the APP reports: People and businesses that illegally transport or dump asbestos in NSW will face on-the-spot fines of up to $15,000 under tough new pen...Read more
Jim's Building Inspections hits 100 Franchisees!
Jim's Building Inspections is pleased to announce that September 2017 saw its 100th Franchisee sign on to Jim's Building Inspections, officially launching the division as one of the biggest building inspection companies in Australia. Director Paul...Read more
Who Needs a Building Inspection?
Building Inspections are generally ordered in the process of buying or selling a home. A building inspection may also be required if you discover that your home has developed a building defect over time or in response to an incident or accident. ...Read more
Beware Of Unqualified Building Inspections
How to avoid unqualified building inspections? In a Fairfax article, Chris Dyce, president of the Australian Society of Building Consultants, says go with experienced building inspectors. Make sure they’ve work experience in the industry and don’...Read more
Concrete stumps are not immune to decay under extreme conditions.
Many elevated properties sit on some type of stump support whether it be timber , steel , masonry or concrete . Whist most people would consider concrete stumps to be maintenance free , this is far from the truth . Recently one of our Building Inspe...Read more