Building and Pest inspector standing in front of Jims Building Inspections car

Call 131 546 and get a quote or book a New Home Inspection for Wilkin online today.

Jim’s Building Inspections conducts new home inspections (also known as new construction inspections) in Wilkin and the surrounding areas. Our expert consultants can assist you with every stage of your build and ensure your new build meets your expectations and the necessary standards.

Our local consultants have extensive experience and hold public liability and professional indemnity insurance—meaning you can have peace of mind when you acquire the services of a Jim’s Building Inspector.

We offer same day service for New Home Inspections in Wilkin and provide written reports via email within 24 hours of the inspection being conducted.

New Home Inspection Checklist

There are four key inspection stages which can be carried out for New Home Inspections:

1. Slab Stage

The slab stage or the base stage inspection is essential in the inspection process. Finished concrete is inspected to ensure there is an even and consistent finish. The surface should not be powdery or flakey. Levels are checked to confirm the slab has been installed within allowable deviation in the over level across and room or the entire build. The edge rebate is checked to ensure it is not “honeycombed” and there is no evidence of steel reinforcement protruding as it must have at least 40mm concrete coverage. The vapour barrier must extend past the poured concrete slab with adequate overlap left so that it extends up the side wall of the slab past the final finished ground level once the construction is completed.

2. Frame Stage

Frame stage inspections are conducted providing an independent assessment of the works to confirm they have been completed ready for stage payment. Internal checks and company appointed inspections are supported with a fresh and focussed and our review monitors the frame with respect to the approved construction methods stipulated in Australian Standard 1684.2 and the Engineers design requirements as detailed on the Approved Plans.

The installation of windows and door frames are checked at this stage. Frame positioning in relation to the supporting slab is checked with any overhanging tolerances along with load bearing timbers, lintels and orientation of Jack Studs above openings. Items such as the correct number of timber blocks and their securing method are checked along with all bracing, mechanical fasteners, tie downs and anchors.

3. Lockup

At this stage we inspect the roofing that is installed to ensure it is complete and free of defects and damage, all flashings are installed. A visual inspection is carried out to check the installation of Flashings. Brick work is checked for correct installation. All windows and doors are installed with the correct fixings using appropriate blocks and the frame straight, plumb and true.

The installed plaster to the ceilings, wall linings and fitted cornice is checked to ensure it is installed to acceptable standards. Waterproof membrane to showers & wet areas are inspected to ensure they are correctly installed and comply with the requirements of the Building Code.

4. Handover

Handover Inspections require an exhaustive check of the construction. At handover inspection we check that all the work completed “In a proper and workman like manner” ensuring that the workmanship is at an industry standard. The construction of the dwelling needs to reflect the Approved Plans and we check that all components of the building comply with relevant Australian Standards and Building Codes.

Handover or Final stage inspections are also called Practical Completion Inspections (PCI) and Pre Handover Inspections. Handover inspections are generally carried out on new homes when construction of the entire home has been completed and all internal fittings, fixtures and finishes have been installed and applied inside the home compliant with the relevant building plans and specifications.

To arrange a quote or a building inspection for a property in Wilkin, call Jim’s Building Inspections on 131 546.

Or book your Wilkin New Home Inspection service online. Reports can be delivered within 24 hours of inspection.

Asbestos - Not Just About Housing

FEATHERS were flying in Red Hill last week when neighbours discovered asbestos sheeting was being removed from a disused chicken shed near their properties. First reported in the Southern Peninsula News (6 November 2018) the story continues: Mo...
Read more

Why arranging a Pre-Sale inspection can give you an advantage

If you’re thinking about listing your home for sale, it is the perfect time to look at anything you may need to fix or repair. You’re probably used to the ceiling water stains and spots of mould in your kitchen cupboards, but these minor defects ...
Read more

Asbestos Dumpers Beware

There’s a right way and a wrong way to do a job and this is especially true for asbestos. As the APP reports: People and businesses that illegally transport or dump asbestos in NSW will face on-the-spot fines of up to $15,000 under tough new pen...
Read more

Passing Your Next Rental Inspection With Mould-Busting Professionals

What’s one thing landlords despise? If you guessed mould, you’re right. “The obvious things we look for are mould in the bathrooms/cupboards/bedrooms,” says one expert in the field. “This is usually an indication that the tenant isn’t ...
Read more

Three Simple Ways To Fight Mould

Some things are out of our control. Others are in our control. Thus, when speaking about mould, there are many things we can do. One: Root causes. Find them. A good place to start: Jim’s Building Inspections. When mould is found by experts it’...
Read more

Who Needs a Building Inspection?

Building Inspections are generally ordered in the process of buying or selling a home. A building inspection may also be required if you discover that your home has developed a building defect over time or in response to an incident or accident. ...
Read more

Termite Damage Is Leading Factor When Buying Queensland Homes

Are you buying a home or investment property in Queensland? Amongst the important things to consider is the termite and borer status of your intended property. It is recommended that you should always have both a pre-purchase building inspection a...
Read more

New homes & Termite zones

An increasing number of councils across Australia are seeing the value in designating residential zones as termite prone areas in an effort to help local communities avoid costly repairs and horror surprises in the future. Victoria is the only Aus...
Read more

Asbestos-Caused Cancer Trends Up

Asbestos-caused cancers are trending up, according to recent data from 2017. The grim facts from the Australian Institute of Health and Welfare: 710 Australians were diagnosed with mesothelioma in 2016 – a cancer caused by exposure to asbesto...
Read more

House Inspections Take Time

Okay, random question: How long would you spend inspecting a house before buying it? In Australia, more than half of homeowners (58%) spend less than an hour inspecting before the big buy, according to research put out by ME bank. Thus, it’s not...
Read more


In Wilkin

vic Suburbs Index

New Home Inspections suburbs in wimmera region